Brake Services & Repairs in Adelaide

About This Service

All Clutch & Brake has specialised in brake services and repairs across Adelaide since 1984. We are not a general mechanic — brakes and clutch systems are all we do, which means our diagnostic accuracy, turnaround times, and quality of workmanship are built around one thing: keeping your vehicle stopping safely and reliably.

Whether your vehicle needs a simple brake pad replacement, a full rotor and caliper overhaul, hydraulic system repairs, or a performance brake upgrade, our St Marys workshop handles everything in-house — including disc and drum machining that most Adelaide workshops outsource.

What Is Included in a Full Brake Service?

A full brake service at All Clutch & Brake covers every component of your braking system — not just the pads. Before any work is quoted or started, we carry out a thorough inspection that includes:

Brake pad thickness measurement (front and rear) — worn pads left too long damage rotors and increase stopping distances significantly.
Disc and drum measurement against minimum thickness tolerances — rotors below spec warp under heat and cannot be resurfaced safely.
Caliper operation and seal condition — seized or leaking calipers cause uneven pad wear and pull under braking.
Brake fluid condition and hydraulic pressure — degraded fluid absorbs moisture and raises the risk of brake fade under hard use.
Brake lines and hoses — we check for cracking, swelling, corrosion, and leaks at every connection point.

After inspection, we provide a clear written quote covering exactly what needs replacing and why. No work proceeds until you have approved the scope and price.

Brake Pad & Rotor Replacement

Brake pad and rotor replacement is the most common brake service we perform. We stock pads and rotors to suit the full range of vehicles we see in Adelaide — from small passenger cars and SUVs to heavy 4WDs, utes, and light commercial vehicles.

Parts brands we use include DBA (Disc Brakes Australia), Bremtec, Bendix, RDA, and Intima depending on your vehicle type and use case. For standard street use, we fit OEM-equivalent components. For tow vehicles, 4WDs, and performance applications, we source heavy-duty and performance-grade parts built to handle higher heat and load.

Common vehicles we service include Toyota HiLux, LandCruiser 70, 76, 79, and 200 Series, Ford Ranger, Mazda BT-50, Nissan Patrol, Holden Commodore, Subaru Outback, and most European makes including BMW, Mercedes-Benz, and Volkswagen.

In-House Disc & Drum Machining

When brake rotors or drums are worn but still within safe tolerances, machining (resurfacing) restores a smooth, flat surface and extends component life — saving you the cost of full replacement. All Clutch & Brake carries out disc and drum machining entirely in-house using precision brake lathes.

Most Adelaide workshops send machining out to a third party, adding cost and delay. We do it ourselves — direct quality control at every step. See our dedicated Brake & Flywheel Machining page for full detail on the process.

Brake Caliper & Hydraulic System Repairs

The hydraulic side of your braking system — master cylinder, brake lines, hoses, and calipers — is what translates pedal pressure into stopping force. When any part of this system fails, the consequences are serious.

We carry out complete caliper rebuilds and replacements, master cylinder repairs, brake line replacement (including custom hard-line fabrication), brake fluid flushes, and full hydraulic bleed procedures. Our team also tests and rebuilds brake boosters and hydrovac units for heavy commercial applications — work that very few Adelaide workshops handle in-house.

For a full breakdown of caliper and hydraulic services, visit our Brake Caliper & Hydraulic Repairs page.

Performance Brake Upgrades

Standard brakes are engineered for normal driving conditions. If your vehicle is used for towing, track days, off-road driving, or carries significant load modifications, your factory brake system may not be up to the task under sustained high-heat conditions.

We supply and fit performance brake upgrades using DBA slotted and cross-drilled rotors, Intima, Project Mu, and D2 Racing performance pads, and big brake caliper kits for vehicles where the stock setup isn't sufficient. Every upgrade is matched to your specific vehicle and use case — we do not recommend or fit performance parts unnecessarily.

Vehicles We Service for Brake Repairs in Adelaide

We work across all vehicle types at our St Marys workshop. Our team services:

Passenger cars and hatchbacks — Toyota Corolla, Mazda 3, Hyundai i30, Honda Civic, Subaru Impreza, and all European makes.
SUVs and crossovers — RAV4, CX-5, Tucson, Forester, Tiguan, X-Trail.
4WDs and utes — Toyota HiLux, LandCruiser (all series), Ford Ranger, Mitsubishi Triton, Isuzu D-Max, Nissan Patrol, and Jeep Wrangler.
Light commercial and fleet vehicles — vans, cab chassis, and fleet-managed vehicles serviced to schedule.
Performance and modified vehicles — Subaru WRX/STI, HSV, Ford Mustang, track-prepared vehicles, and builds requiring upgraded brake systems.

Why Adelaide Drivers Choose All Clutch & Brake for Brake Repairs

There is a meaningful difference between taking your vehicle to a general mechanic who occasionally does brakes and a workshop that has done nothing but brakes and clutches for over 40 years. Our team knows these systems inside out — from the characteristics of a dual-mass flywheel under heavy braking to the correct bleed procedure for ABS-equipped 4WDs.

We also incorporate the experienced team from Dantrak Automotive, further deepening our technical capability across a wider range of vehicles and brake system configurations.

Specialists only — brakes and clutch systems, nothing else.
In-house machining — no outsourcing, faster turnaround, quality we control.
Fixed-price quotes — no surprises when you collect your vehicle.
100% workmanship guarantee — we stand behind every job we complete.
4.9★ rating across 106 reviews — Adelaide drivers have been coming back since 1984.

Brake Service Pricing Guide

Brake repair costs in Adelaide vary depending on the vehicle, which components need replacing, and the grade of parts used. The table below gives a general guide based on industry averages. All jobs start with a precise inspection and a fixed-price quote — there are no surprises at pickup.

All prices listed are based on industry averages and are provided as a guide only. Final pricing is determined by your vehicle's make and model, parts availability, labour time required, and the outcome of diagnosis. Contact All Clutch & Brake on 08 8277 8122 for an accurate quote specific to your vehicle.

Book Your Brake Inspection in Adelaide

If your brakes are making noise, the pedal feels soft or spongy, your vehicle is pulling under braking, or you simply cannot remember the last time your brakes were inspected — book in now. Early detection prevents minor wear from becoming a serious safety issue or expensive repair.

Call All Clutch & Brake on 08 8277 8122 or visit us at Unit 1/3 Adelaide Terrace, St Marys SA 5042. We offer precise brake inspections and fixed-price quotes for all vehicle types across Adelaide.

Pricing Guide

How Much Does Brake Services & Repairs in Adelaide Cost?

Prices are a guide only. Final price depends on vehicle make, model, and parts required. Contact us for an exact quote.

Our Approach

How We Deliver

Related Pages

You May Also Be Interested In